Hach ANATEL PAT700 - User Slopes Tab; Lamp Tab

Page 72 Setup – PAT700 Total Organic Carbon Analyzer
Operator Manual Anatel
WGM - 28 November 2007 - Edition 01
The thermistor tab shows the read-only coefficient values for the thermistor.
Return icon returns you to the setup dialog box and saves the changes. Any changes are
noted in the audit trail.
User slopes tab
Figure 5-28 Factory settings dialog box, user slopes tab
TOC text box (read only) allows you to view the TOC calibration factor. This value is updated
after a TOC calibration has been performed.
Conductivity text box (read only) allows you to view the conductivity calibration factor. This
value is updated after a conductivity calibration has been performed.
Return icon returns you to the setup dialog box and saves the changes. Any changes are
noted in the audit trail.
Lamp tab
Figure 5-29 Factory settings dialog box, lamp tab