Page 71 Setup – PAT700 Total Organic Carbon Analyzer
Operator Manual Anatel
WGM - 28 November 2007 - Edition 01
Export oxidation buffers icon copies all oxidation buffers (up to five) to a connected USB
flash drive. Before copying begins, the analyzer verifies that there is data to export and that a
USB flash drive is inserted into the analyzer’s USB port.
Return icon returns you to the setup dialog box.
Cell tab
Figure 5-26 Factory settings dialog box, cell tab
Gain text box (read-only) allows you to view the cell gain factor.
Offset text box (read-only) allows you to view the cell offset value.
Return icon returns you to the setup dialog box and saves the changes. Any changes are
noted in the audit trail.
Thermistor tab
Figure 5-27 Factory settings dialog box, thermistor tab
To Next Page
Loading...
