PC Application
User’s Manual 19
2. Power on the IDSO.
3. Set connect mode to USB mode. Please refer to Set Connection Mode.
4. Double click shortcut icon on desktop to open IDSO software. It will communicate with IDSO
device automatically.
5. If the device is connected with PC successfully, the status information will display “Connected”
on bottom left status bar.
Note: Only IDSO windows software can support USB mode.
Communicate with PC via Wi-Fi
1. Power on the IDSO.
2. Set connect mode to Wi-Fi. Please refer to Set Connection Mode.
3. Connect your PC with the Wi-Fi access point.
4. Double click shortcut icon on desktop to open IDSO software. And click in toolbar to
connect via Wi-Fi.
5. If the device is connected with PC successfully, the status information will display “Connected”
To Next Page
Loading...
