PC Application
User’s Manual 34
Note: If you turn on the “Reference” channel, the load file window will appear.
2.11.3 Save/Load Setup
Save Setup
You can use the “File-> Save Setups” in main menu to permanently save setting.
Load Setup
You can use the “File-> Load Setups” in main menu to permanently recall setup.
2.12 Display System
Click “Type” in “Display” menu.
The following figure shows the type parameters setting.
Display Type
Click “Display->Type” in main menu. Select display type Vectors or Dots.
To Next Page
Loading...
Need help?
General
