Appendix
User’s Manual 53
Keep pressing power button until power indicator lights up.
2. The indication of communication USB/WI-FI is slow blinking. Hotspot, creates own wireless
local area network (WLAN).
3. Connect your Apple/Android device with Wi-Fi hotspot. Click “SettingWi-Fi” options, then
select Network Name of the IDSO device. You can get Network Name from the label of IDSO’s
shell.
4. Connect the IDSO device to a signal source.
5. Tap the IDSO app to open it. Then click “RUN” button. The scope is ready to use.
If you can’t connect it successfully, please do as the followings:
1) Close the IDSO APP.
2) Long press the Easylink button until the “USB/WI-FI” LED is off, release the Easylink
button. IDSO device will reboot automatically. If the IDSO device doesn't reboot
automatically, reboot it manually.
3) After rebooted, the IDSO device will be in direct mode.
IDSO device work in Indirect Mode
When in the indirect mode, IDSO device and iOS device communicate via a third-path Wi-Fi
router.
1. If the IDSO APP is running on background, please close it firstly.
2. Connect the iOS device to the Wi-Fi router. (SettingWi-Fi )
3. Open IDSO App, MENU->Utility->Indirect Mode, input the router's password, Press Apply
button.
4. Long press the Easylink button until the “USB/Wi-Fi” LED off, release Easylink button.
IDSO device will reboot automatically. If the IDSO device doesn't reboot automatically,
reboot it manually.
After rebooted, IDSO will connect to the Wi-Fi router. IDSO App should pop up a tip.
3.4 Set Horizontal System
3.4.1 Horizontal Setting
1. Time/DIV: Use gesture to set the time base.
2. Format: leads the setting of the horizontal format parameters.