Appendix
User’s Manual 51
AUTO: Automatically set the oscilloscope controls to generate a usable display of the input
signals. Refer to the following table for relative content.
Menu: Main menu.
6. Trigger Level
Tap the trigger level icon and move up or move down, the trigger level value will display on the
screen.
7. Horizontal Trigger position
Tap the horizontal trigger position icon and move left or move right, the horizontal trigger position
will display on the screen. Click “Trigger->Indicator” in main menu and slid the slider to enable the
function.
8. CH2 Zero level
The marker shows the reference points of the displayed waveforms of CH1.
9. CH1 Zero level
The marker shows the reference points of the displayed waveforms of CH2.
To Next Page
Loading...
