Hantek TO1154D User Manual

Measure
EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
47
10.2.2 Count parameters
1. Positive pulse number: The number of positive pulses rising from below the lower
threshold to above the upper threshold.
2. Number of negative pulses: The number of negative pulses falling from above the
upper threshold to below the lower threshold.
3. Number of rising edges: The number of rising edges rising from below the lower
threshold to above the upper threshold.
4. Number of falling edges: The number of falling edges falling from above the upper
threshold to below the lower threshold.
5. Trigger count: The number of rising edges (or falling edges).
Note: The above measurements only apply to analog channels. The upper and
lower thresholds are 90% and 10% respectively.

Hantek TO1154D Specifications

General

Brand	Hantek
Model	TO1154D
Category	Test Equipment
Language	English