HBM CANHEAD - Base module (CB1014)

Configuration
22 A01185_11_X00_00 HBM: public CANHEAD
A base module is available for each strain gage nominal resistance value (120,
350 ).
All the measuring point specific data is stored in the base module (e.g.
CAN bus ID, calibration values, user data).
Each module can be identified through an ID that is unique throughout the
world. This ID is permanently stored in the base module.
Strain gage connection
CAN bus connection
Fig. 6.3 Base module (CB1014) for strain gage and CAN bus connection