Heyer Pasithec - Automatic Leak Test

H E Y E R P a s i t h e c
38 / 106 HEYER Pasithec, Operator’s manual Rev. 0.2 Draft - 12/09
4.1.4 Automatic Leak Test
When the Safety Valve Test is complete, the Automatic Leak Test is displayed on the screen.
Figure 4-8 Automatic Leak Test
Click “Continue” to perform the Leak Test.
Figure 4-9 Automatic Leak Test in progress
When the leak test is complete, the following is displayed:
Figure 4-10 Automatic Leak Test Pass interface