H E Y E R P a s i t h e c
Rev. 0.2 Draft – 12/09 HEYER Pasithec, Operator’s manual 65 / 106
7.3.2.1 Disassembling
To disassemble the bellows assembly:
(To assemble the bellows assembly, perform the steps in “Disassembling the Bellows Assembly” in
reverse order):
1. Bellows assembly is fixed on the absorber
cycle. Turn counterclockwise and remove the
bellows housing.
2. Detach the folding gasbag.
3. Detach the top plate from the folding gasbag,
and remove inner ring from the top of folding
gasbag.
4. Turn counter-clockwise and remove the three
black handles from the rim.
To Next Page
Loading...
