HIKVISION DS-7600NI-SE/P Series User Manual

DS-7600 Series NVR User’s Manual
15
Right button will select the next and previous record files.
In Live View mode, these buttons can be used to cycle
through channels.
In PTZ control mode, it can control the movement of the
PTZ camera.
ENTER
The ENTER button is used to confirm selection in any of
the menu modes.
It can also be used to tick checkbox fields.
In Playback mode, it can be used to play or pause the video.
In single-frame Playback mode, pressing the button will
advance the video by a single frame.
In Auto-switch mode, it can be used to stop /start auto
switch.
13
PTZ
Enter the PTZ Control mode.
In the PTZ Control mode, it is used to adjust the iris of the
PTZ camera.
14
ESC
Back to the previous menu.
Press for Arming/disarming the device in Live View mode.
15
RESERVED
Reserved.
16
F1
Select all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ light (if
applicable).
In Playback mode, it is used to switch between play and
reverse play.
17
PTZ Control
Buttons to adjust the iris, focus and zoom of a PTZ camera.
18
F2
Cycle through tab pages.
In synchronous playback mode, it is used to switch between
channels.

HIKVISION DS-7600NI-SE/P Series Specifications

General

Brand	HIKVISION
Model	DS-7600NI-SE/P Series
Category	Network Hardware
Language	English