DS-7600 Series NVR User’s Manual
79
10. You can click on the camera list anytime you want to configure the added camera.
11. If the camera is manually added, you can select the camera and click the Advance Set button to
pop up an Advance Settings window, as shown in Figure 79.
Figure 79 Advance Settings Menu
1. Select the Network tab to modify the IP Camera Address and Configuration Port. Click Apply to
save the settings.
2. Select Password tab to change the password. Click Apply to save the settings.
3. Click OK to back to the previous menu.
4. If the camera status turns Disconnected to Connected, you can click to get the live view of
the camera.
Note:
Support third party IP camera: PANASONIC, SONY, AXIS, SANYO, BOSCH, and ACTI.
To Next Page
Loading...
