HIKVISION DS-7608NI-M2 Series User Manual

Figure 1-14 ISUP Sengs
2. Select Access Type as ISUP.
3. Check Enable.
Note
Enabling ISUP will disable other plaorm access.
4. Set the related parameters.
Server Address
The
plaorm server IP address.
Server Port
The plaorm server port, ranges from 1024 to 65535. The actual port shall be provided by
the plaorm.
Device ID
Device ID shall be provided by the plaorm.
Version
ISUP protocol version, only V5.0 is available.
Encrypon Password
Encrypon password is required when using ISUP V5.0 version, it provides more secure
communicaon between the device and plaorm. Enter it for vericaon aer the device is
registered to the ISUP
plaorm. It cannot be empty, or "ABCDEF".
5. Click Apply to save the sengs and restart the device.
What to do next
You can see the registraon status (online or oine) aer the device is restarted.
Network Video Recorder User Manual
14

HIKVISION DS-7608NI-M2 Series Specifications

General

Brand	HIKVISION
Model	DS-7608NI-M2 Series
Category	Network Hardware
Language	English