HIKVISION DS-K1T321 Series User Manual

3) Tap Save.
4.
Select the Wi-Fi name, and tap Connect.
5.
Enter the password and tap Save.
6.
Set WLAN parameters.
1) Set the IP address, subnet mask, and gateway. Or enable DHCP and the system will allocate
the IP address, subnet mask, and gateway
automacally.
2) Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and
the alternate DNS server.
3) Tap Save.
Set Port Parameters
You can set the HTTP, RTSP, HTTPS, and Server according to actual needs when accessing the device
via network.
Tap Conguraon → Network → Basic Sengs → Port , to enter the seng page.
HTTP
It refers to the port through which the browser accesses the device.
RTSP
It refers to the port of
real-me streaming protocol.
HTTPS
DS-K1T321 Series Face Recognion Terminal
63

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English