4.2 Observing Waveforms
92
Cursor Value for Specified
Channels
Press the outer left and right scrolling
keys to scroll in large steps.
Changing Cursor Type
Select from the [Type] setting options.
• Trace
• Vert (Vertical)
• Horz (Horizontal)
( : default setting)
Selecting which channels
have their cursor values dis-
played
Select from the [AB Crsr] setting
options.
• [All Ch]
Displays all channels. The cursor
selected for [Move] is dis-
played.(Selecting [AB Cur] dis-
plays the difference between A
and B cursor values.)
• [Ch Set]
Specify which channels to display
with A and B cursors. The cursor
values for the specified channels
are displayed.
( : default setting)
To select which cursor to move
Select from the [Move] setting options.
• A Cur
•B Cur
•AB Cur
( : default setting)
About Cursor Types
Cursor Type Example Cursor Value
Trace Cursors
Displays the time and measurement values at the A/B cursors,
or the time and
measurement differences between the A/B cur-
sors.
Displays the intersections (trace points) of cursors and wave-
forms.(the intersections of waveform traces of selected channels)
Vertical Cur-
sors
Displays the time and frequency values at the A/B cursors, or
the time and frequency differences between the A/B cursors.
Horizontal
Cursors
Displays the measurement values at the A
and B cursors for
the selected channel(s), or the difference between A/B cursor
values. A/B cursors can be enabled for any channel.
To Next Page
Loading...
