Safety Information
3
This manual contains information and warnings essential for safe operation of the
HiLogger and for maintaining it in safe operating condition. Before using it, be sure
to carefully read the following safety precautions.
The following symbols in this manual indicate the relative importance of
cautio
ns and warnings.
Safety Information
This HiLogger is designed to comply with IEC 61010 Safety Stan-
dards, and has been thoroughly tested for saf
ety prior to shipment.
However, mishandling during use could result in injury or death, as
well as damage to the HiLogger. Using the HiLogger in a way not
described in this manual may negate the provided safety features.
Be certain that you understand the instructions and precautions in
the manual before use. We disclaim any responsibility for accidents
or injuries not resulting directly from HiLogger defects.
Safety Symbols
In the manual, the symbol indicates particularly important infor-
mation that the user should read before using the HiLogger.
The symbol printed on the HiLogger indicates that the user should
refer to a corresponding topic in
the manual (marked with the sym-
bol) before using the relevant function.
Indicates a double-insulated device.
Indicates a grounding terminal.
Indicates DC (Direct Current).
Indicates AC (Alternatin
g Current).
Indicates the ON side of the power switch.
Indicates the OFF side of the power switch.
Indicates that incorrect opera
tion presents an extreme hazard
that could result in serious injury or death to the user.
Indicates that incorrect operation presents a significant hazard
that co
uld result in serious injury or death to the user.
Indicates that incorrect operation pres
ents a possibility of injury
to the user or damage to the HiLogger.
Indicates advisory items related to performance or correct
ope
ration of the HiLogger.
To Next Page
Loading...
