10.6 Auto Sending Data using the FTP Client Function
214
Data Transfer Timing
To calculate: transfer time (s) = file size (KB) / transfer speed (KB/s) + transfer prepara-
tion time (s).
See "Appendix 5 Binary File Size Calculation" ( p. A10) for file size information.
Typical transfer speed is 300KB/s, and typical transfer preparation time is 3 s.
Example: For a 3MB (3,000KB) file,
Transfer time = 3,000KB / 300 (KB/s) + 3 (s)
= 10 + 3 (s)
= 13 (s)
Testing File Transfer
Select [FTP Transfer
Test].
Apply
Transfer the file FTP_TEST.TXT to C:\In-
tpub\ftproot.
If the file sending test fails,
check the HiLogger's auto-
send settings and the FTP set-
tings on the PC.
If the sending test succeeds,
start measurement. Data is
automatically sent to the FTP
server (PC).
To Next Page
Loading...
