10.1 USB Settings and Connections
167
3
Chapter 10 Connection to a PC (Communication)
10
Install the USB driver as described below before connecting to the Memory HiLogger via
USB cable.
2. Installing the USB Driver
If you install the USB driver in Windows2000, the USB Drive Mode of the
device will be disabled.
1
Install the driver.
Run [SetupDriver32.msi] in the CD-R.
If [Logger Utility] is already installed,
run the CD from the following location.
[c:\Program Files\HIOKI\LoggerUtility\D
river\SetupDriver32.msi]
If you are using the WindowsVista/7 64bit version:
Run [S
etupDriver64.msi] in the CD-R.
If Logger Utility is already installed, run the CD from the following location.
[c:\Program Files\HIOKI\LoggerUtility\D
river\SetupDriver64.msi]
2
Click [Next].
3
Check [Everyone] and Click
[Next] to start installing.
When you want to change the
inst
allation destination
Click[Browse...] to change the fold-
er to install into. Normally, there is
n
o need to change.
Depending on the environment, the dialog box may take some time to appear
so please wait till it does so.
To Next Page
Loading...
