Hioki LR8401-20 - Confirming Inputs (Monitor)

1.4 Basic Operation
26
You can confirm the status of inputs and display ranges with the current settings (data is
not acquired to internal memory).
This function is convenient for checking measured values before activating real-time sav-
ing.
Confirming Inputs (Monitor)
• The monitor function is not available while measuring.
• To display instantaneous values while the HiLogger is measuring, first
press WAVE/DATA to switch to the [Wave+Value] display, then start
measurement.
• Depending on the scaling setting, channels requiring more than 14 char-
acters to display the measured value and unit symbols may be displayed
in
smaller characters.
Press MONIT.
Wave
Select to display the waveforms for all chan-
nels, or for those on a selected input unit.
Unit
Select the input unit for the value dis-
play.
Move the cursor to [UNIT1], press
ENTER, and switch with the up/down
cursor or UNIT.