10.6 Auto Sending Data using the FTP Client Function
196
Files auto saved by the HiLogger to removable storage can be automatically sent to
other network clients, or to a remote FTP server.
•For the FTP client to control auto sending of data, the IP address of the FTP server PC
must b
e specified.
•The Windows FTP server function can be used. Enter and register the HiLogger user
name and password in the FTP server. For details about the Windows FTP server, see
Internet Information Services (IIS) in Windows Help.
•Free programs such as FileZilla Server can be used in place of Windows FTP server.
10.6 Auto Sending Data using the FTP Client
Function
• Set Auto Save to Waveform (realtime), CSV (realtime), Waveform+Calc,
or CSV+Calc.
• Calculated values are not transferred automatically.
• To save or transfer data periodically, set the Split Save setting to Peri-
odic.
• To continue saving or transferring data even when the CF card becomes
f
ull, select Overwrite Oldest Save.
See: "Automatic Saving (Waveform Data and Numerical Calculation Results)"(p.
125)
General Procedure
1
LAN Settings and Connections (p. 178)
2
Set up the FTP server on the PC (p. 197)
3
Enable FTP auto sending on the HiLogger (p. 211 to p. 214 )
4
Configure auto saving (p. 125).
5
Start measuring with the HiLogger
When auto saving a file on removable storage, the file
is also sent automati-
cally to the FTP server PC.
6
Check communication status (p. 215)
To Next Page
Loading...
