6.2 Saving Data
124
Basically, three methods are available for saving.
6.2 Saving Data
(Default setting)
Press SAVE to select and
save the selected contents.
No settings are needed be-
fore saving this way (p. 128).
Measurement data is simulta-
neously saved during mea-
surement. Calculation results
are saved only after measure-
ment is finished.
Make this setting before
starting measurements.
To save automatically
while measuring
To save immediately
upon pressing the
SAVE
To save selected con-
tents
Auto Save Quick Save Select & Save
Insert a removable storage
(p. 45)
Set the Auto Save (p. 125)
Select what to save.
Measurement
Saving proceeds automati-
cally
The following can be saved
simultaneously:
• Waveform Data
• Numerical Calculation
Results
Insert a removable storage
(p. 45)
Set the function of SAVE to
[Quick Save] (p. 128)
Select what to save.
Press SAVE after measur-
ing.
(Saving is not possible
while measuring.)
Save
• Waveform Data
• Screen Image
• Setting Data
• Numerical Calculation
Results
Insert a removable storage
(p. 45)
Set the function of SAVE to
[Select & Save] (p. 128)
Press SAVE after measuring
(Saving is not possible
while measuring.)
Select what to save.
Press ENTER.
Save
• Waveform Data
• Screen Image
• Setting Data
• Numerical Calculation
Results
: To save a waveform partially, specify a period by using A/B
cursors. (Saving a waveform section is not available with Auto
Save)(p. 90)
To save a screen image, display the desired screen before
saving.
Before saving, select the
items to be saved on the
[System] screen. These are
saved immediately when you
press SAVE. This is conve-
nient for saving certain types
of data, or when you want to
save immediately while moni-
toring (p. 128).
To Next Page
Loading...
