8.2 Screen Key Operation Settings
155
3
Chapter 8 System Environment Settings
8
Select the display method for the horizontal axis
at the bottom of the screen. This setting also
determines the time display for data saved in
CSV format.
Time Disp
(
Time Value
Display)
Select the display language.
Language
To help avoid operator errors, confirmation messages can be displayed when measure-
me
nt is manually started or stopped.
Start/Stop
messa
ge
(Start/Stop
Confirmation
Messages)
Selecting the Horizontal (Time) Axis Display
1d2h3m4s
(Time)
08-07-10 12:10:30
(Date/Time)
10
(Data Point)
Setting options:( : default setting)
Time* Displays the time span from the start of mea-
surement. If triggering is e
nabled, the displayed
time span is from the last trigger event.
Date Displays the date and time every ten divisions.
Data
Pts
Displays the number of data points from the
start of measurement. If triggering is enabled,
the displayed data points begin from the last
trigger event.
Selecting the Display Language
Setting options:( : default setting)
English
Display in English.
Japanese Display in Japanese.
French Display in French
Display of Start/Stop Confirmation Messages
Setting options:( : default setting)
Off Confirmation messages are not displayed.
Pressing ST
ART and STOP start and stop
measurement immediately.
On
Confirmation messages are displayed. To
start or stop measurement, move the cursor
to “Yes” and press ENTER.
To Next Page
Loading...
