3.2 Configuring Measurement Settings
50
Configure measurement settings on the [Setting] screen.
The available measurement methods are Norma
l Recording, Continuous Recording
and Repeat Recording.
3.2 Configuring Measurement Settings
The Setting screen cannot be displayed while measuring.
Measuring Method Setting Method
Normal Recording
Set [Cont] to On.
Continuous
Recording
Set [Cont] to Off, and set a [Record time] (measurement time span).
Repeat Recording
Set [Repeat] to On.
Continuous
Recording
Normal
Recording
Start Measurement Stop Measurement
Press STOP to stop measuring. Otherwise, mea-
surement continues until the stop-trigger criteria are
met.
Measures for the specified recording time span.
Measurement stops when the specified recording
time has elapsed.
Measurement can also be stopped by pressing
STOP before the end of the recording time, or the
stop-trigger criteria are met.
Repeat
Recording
When stopped by a stop trigger or elapsed recording
time, measurement automatically restarts. Press
STOP to stop measuring.
([Repeat]: On)
Measure for the specified
recording length.
Time Setting by Key Operations
Apply
Open the setting options
for the item to be set.
Select from the listed op-
tions.
1
2
Select the [Setting]
screen.
Move to a setting item.
To Next Page
Loading...
