To save data,
insert a CF card/USB flash drive.
3. AC adapter
connection
5.Turn the Power On
Front
Panel
Rear
Panel
Right
Side
1. Preparations for Measurement (p. 27)
1. Attach Expansion Units (as needed)
2. Install the
Battery Pack
4. Connecting
Configure Recording Settings (p. 50)
1 Set the data acquisition (record-
ing) interval, and recording length
(time spa
n).
2 Enable auto saving of measured
data to removable storage (CF
card or USB flash drive) (p. 125).
Data stored in internal memory is lost
about 30 minutes after power-off. We
recommend auto saving important
data to removable storage.
Move to a
setting item
Open the
setting options
Select Apply
1
1
2
2. Settings (p. 49)
To Next Page
Loading...
