Hioki LR8401-20 - Sending E-Mail

10.7 Sending E-Mail
216
E-mail notifications can be automatically sent from the HiLogger when start or stop
triggering occurs during measurement, and when an alarm, power outage recovery,
memory-full or removable-storage-full event occurs. Notifications can be sent to a
network device, remote PC, or e-mail-supporting cell phone via an SMTP mail
server. Register up to three recipient addresses.
10.7 Sending E-Mail
Frequent alarm events can generate excessive e-mails. In this case,
enable Alarm Hold to limit notifications to the first alarm event on each
channel. (See Alarm Hold Settings on
p. 111 .)
General Procedure
1
LAN Settings and Connections (p. 178)
2
HiLogger E-Mail Settings (p. 217)
3
Testing E-Mailing (p. 220)
4
Start Measuring with the HiLogger
E-mail is sent by the mail server when a trigger or alarm event occurs.
5
Confirming E-Mail Sending Status (p. 221)