2.6 Inserting a CF Card or USB Flash Drive (when saving data)
45
3
2
Chapter 2 Measurement Preparations
To save and reload HiLogger measurement data, use an optional CF card (as
described below) or an after-market USB flash drive.
Be sure to read "Using a CF Card/USB flash drive" (p .11) before using
removable storage media.
2.6 Inserting a CF Card or USB Flash Drive
(when saving data)
• Hioki options PC cards (includes adapter)
Note: The HiLogger does not support card slot adapters.
9727 PC Card 256M, 9728 PC Card 512M, 9729 PC Card 1G, 9830 PC Card 2G
• See "6.4 Data Management" (p. 135) for details about managing data storage in the media.
Important
Performance specifications cannot be guaranteed when using storage media
other than a Hioki-specified CF card option.
If the Eject button is in the released position, press it in first before insert-
ing the CF card all the way in. Inserting the CF card when the Eject button
is re
leased may damage the instrument.
If the CF card does not go all the way in, do not force it in. Press the Eject
butto
n once to release it, then press it again and insert the CF card all the
way in.
• Although real-time saving to USB flash drive is possible, a CF card is
recommended for optimum real-time data preservation.
• USB flash drive security features such as fingerprint authentication
are not supported.
To Next Page
Loading...
