Hioki LR8401-20 - Page 119

5.1 Triggering Measurement Start and Stop
107
3
5
Chapter 5 Specifying Criteria for Measurements
2.5 ms or
greater
2.5 ms or
greater
HIGH: 2.5 to 5.0 V
LOW: 0 to 1.0 V
Triggering occurs at the selecting rising or
falling edge.
(according to the selected [Ext trig] detec-
tion edge)
Voltage range HIGH level: 2.5 to 5.0 V, LOW level: 0 to1 V
Pulse width HIGH period: 1 ms or greater, LOW period 1 ms or greater
Maximum input voltage DC0 to 10 V
Trigger Input Signals