6.2 Saving Data
129
3
Chapter 6 Saving & Loading Data
6
Settings are displayed. Select contents to be saved.
Media Select the priority save destination when [Quick Save] is selected.
Save
Type
Select the type of data to save.
Calculation must be configured before saving numerical calculation results (p. 143).
Format (When [Waveform] is selected) Select the data format.
Data saved in CSV format cannot be reloaded into the HiLogger or Logger Utility pro-
gram. Fortunately, data saved in binary format
can be later converted to text (CSV) for-
mat with the HiLogger or Logger Utility.
Span (When [Waveform] is selected) Select the time span to be saved.
• Before saving a partial waveform, specify the span to be saved (p. 90).
• When a save span is specified for calculation, the results are saved for the
sp
ecified span.
Executing a Save
Press SAVE to immediately save data according to current settings.
When you select [Quick Save] (to save data upon pressing SAVE)
Setting options: ( : default setting)
CF
Save to the CF card first
USB Memory Save to the USB flash drive first
Setting options: ( : default setting)
Waveform
Save waveform data.
Screen Image Save screen image.
Setup File Save setting configuration data.
Calc Results Save numerical calculation results.
Setting options: ( : default setting)
Binary
Select this format to be able to reload the saved data into the
HiLogger, or so that it can be loaded into the Logger Utility
program.
CSV Select this format to save the data as a text file. This format
is ideal for loading into spreadsheet programs like Excel.
Setting options: ( : default setting)
All
Save all measured waveform data.
A-B Save waveform data between A/B cursors.
Start-A Save waveform data from the start of measurement to cursor A.
Start-B Save waveform data from the start of measurement to cursor B.
A-End Save waveform data from cursor A to the end of measurement.
B-End Save waveform data from cursor B to the end of measurement.
To Next Page
Loading...
