Hioki LR8401-20 - Page 194

10.2 LAN Settings and Connections (Before connecting to the network)
182
Setting Items
Host Name Specify the host name for the HiLogger.
DHCP Enable or disable DHCP function.
When enabled, the IP address and subnet mask are obtained automati-
cally.
IP Address Set the HiLogger's IP address.
Subnet Mask Set the subnet mask.
Port
(Port Number)
Set the TCP/IP port number to be used by the HiLogger.
The lowest digit is reserved for use by the HiLogger.
Gateway IP Set this only when [Gateway] is enabled.
Set the IP address of the gateway device.
DNS Select whether to use DNS.
DNS IP Set this only when [DNS] is enabled.
Set the DNS server's IP address.
Setting options
Up to 12 characters (e.g., LOGGER)
Setting options: (  : default setting)
Off

Disable DHCP.
On Enable DHCP.
Setting options
_._._._ (where _ is 0 to 2
55, e.g., 192.168.1.2)
Setting options
_._._._ (where _ is 0 to 2
55, e.g., 255.255.255.0)
Setting options
____ (where _ is 0 to 9, e.g., 880X)
Setting options
_._._._ (where _ is 0 to 255)
Setting options: (  : default setting)
OFF

Do not use DNS.
ON Use DNS.
Setting options
_._._._ (where _ is 0 to 255)