4
Installation GRS103
Release
01
03/2022
5.1.1 GRS103 basic devices 22
5.1.2 Modular GRS103 basic devices 23
5.1.3 GRS103 media modules 24
5.2 Device views 28
5.2.1 Basic device 28
5.2.2 Modular basic device 28
5.2.3 Rear view 29
5.2.4 Port assignment 29
5.3 Power supply 30
5.3.1 Basic device 30
5.3.2 PoE supply voltage for M1-8TP-RJ45 PoE media
module 31
5.4 Management interfaces 32
5.4.1 Signal contact 32
5.4.2 USB-C interface: ACA22-USB-C 33
5.5 Ethernet ports 34
5.5.1 10/100 Mbit/s twisted pair port 34
5.5.2 10/100 Mbit/s PoE port 34
5.5.3 10/100/1000 Mbit/s twisted pair port 35
5.5.4 10/100/1000 Mbit/s twisted pair port 36
5.5.5 100 Mbit/s F/O port 36
5.5.6 100/1000 Mbit/s Combo port 37
5.6 Display elements 37
5.6.1 Device status 37
5.6.2 Port status 39
6 Installation 40
6.1 Checking the package contents 40
6.2 Installing an SFP transceiver (optional) 41
6.3 Mounting a cover panel 41
6.4 Mounting a media module 41
6.5 Installing the device 42
6.5.1 Selecting the installation location 43
6.5.2 Mounting on a flat surface 44
6.5.3 Mounting on a vertical flat surface 45
6.5.4 Mounting in a switch cabinet 46
6.6 Grounding the device 49
To Next Page
Loading...
Need help?
General
