Installation GRS103
Release
01
03/2022
5
6.7 Connecting the signal contact (optional) 49
6.8 Connecting the supply voltage 50
6.9 Connecting the PoE supply voltage to the M1-8TP-
RJ45 PoE media module (optional) 50
6.10 Connecting data cables 52
6.11 Support of PoE 52
6.12 Filling out the inscription label 53
7 Operating the device 54
8 Making basic settings 55
8.1 Default settings 55
8.2 First login (Password change) 56
9 Monitoring the ambient conditions 57
9.1 Monitoring the ambient air temperature 57
10 Maintenance and service 58
11 Disassembly 59
11.1 Removing an SFP transceiver (optional) 59
11.2 Removing a media module 59
11.3 Removing the device 60
12 Technical data 62
12.1 General technical data 62
12.1.1 Basic device 62
12.1.2 Media modules 63
12.2 Supply voltage 63
12.2.1 Basic device 63
12.2.2 Media modules 63
12.3 Power consumption/power output 64
12.4 Signal contact 65
12.5 Climatic conditions during operation 65
12.5.1 Basic device 65
12.5.2 Media modules 65
To Next Page
Loading...
Need help?
General
