HITEC Flash 7 User Manual

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 1: Introduction
3
ACRO and Glider Programming
Acro and Glider Programming Menu.............................................................56
Flight Conditions...............................................................................................57
Aileron Differentials..........................................................................................58
Elevon Mixing....................................................................................................59
V-Tail Mixing.......................................................................................................60
Ailevator Mixing................................................................................................62
Aileron to Rudder Mixing................................................................................63
Elevator to Camber Mixing..............................................................................65
Camber Mixing (GLID Only).............................................................................68
Flap Control........................................................................................................70
Offset...................................................................................................................71
Butterfly Mixing (GLID Only)...........................................................................72
Gyro.....................................................................................................................75
Throttle Cut (ACRO Only).................................................................................76
Throttle Curve....................................................................................................78
Table of Contents
Common Model Programming Menu
Working with the Common Model Function Menus...................................43
Servo Reverse....................................................................................................44
Sub Trims............................................................................................................44
Dual Rates and Exponentials..........................................................................45
Switch Assignment...........................................................................................47
End Point Adjustments ...................................................................................47
Servo Speed ......................................................................................................48
Programmable Mixes .......................................................................................48
Timers..................................................................................................................51
Servo Monitors..................................................................................................54
Throttle Lock......................................................................................................55

HITEC Flash 7 Specifications

General

Brand	HITEC
Model	Flash 7
Category	Remote Control
Language	English