HITEC Flash 7 User Manual

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
81
Flight Conditions cont.
The following features support ight condition programming in HELI mode:
Gyro
Revolution Mix
Swash > Throttle Mix
Throttle Curve
Pitch Curve
1. From the model menu, rotate the jog dial to highlight
“F.COND” and press the jog dial once to enter the ight
conditions menu.
2. Scroll to the ight condition to be congured and press the
jog dial to conrm your selection.
3. Press the jog dial again to activate the switch selection menu
(not applicable in “Normal” ight condition).
4. Scroll to select the switch that you will use to activate this
ight condition and press the jog dial to conrm your
selection.
a. If “NULL” is selected, the ight condition will be inactive.
b. If you selected a switch, the switch position menu will
appear.
- Scroll to highlight the switch position that you will use to
enable the ight condition. Press the jog dial to conrm
your selection.
- Scroll to select “ON” and press the jog dial to conrm your
selection. If you toggle the selected switch, the eld in the
top right corner of the screen will indicate which ight
condition is active.
- Press the back button twice to return to the ight
conditions menu.

HITEC Flash 7 Specifications

General

Brand	HITEC
Model	Flash 7
Category	Remote Control
Language	English