HITEC Flash 7 User Manual

7 Channel 2.4 GHz Aircraft Computer Radio System
7 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
85
Gyro cont.
4. Scroll to the “MODE” eld and press the jog button to activate
the menu.
5. Scroll to select “Single” or “Dual” to denote whether your gyro
is a single-rate or dual-rate unit. Consult the gyro
manufacturer’s instructions if you are not sure. Press the jog
dial to conrm your selection.
3. Rotate the jog dial to select ACT (activate), then press the jog
dial to conrm your selection and activate the GYRO menu.
a. If you choose “Single”:
- Scroll to the “RATE1” eld and press the jog button to activate
the menu.
- Scroll to dial in the desired amount of gyro gain (consult the
gyro manufacturer’s instructions for guidance).
b. If you choose “Dual”:
- Scroll to the “RATE1” eld and press the jog button to activate
the menu.
- Scroll to highlight the value eld and press the jog dial to
activate the selections.
- Scroll to dial in the desired amount of gyro gain (consult the
gyro manufacturer’s instructions for guidance).
- Scroll to highlight the function eld (“Nor” or “T.lock”) and
press the jog dial to activate the menu.
- Scroll to select “Nor” (normal) or “T.lock” (throttle lock).
Throttle lock is used for bench testing the gyro rate
sensitivity.
6. Scroll to highlight “S/W” and press the jog dial to activate the
switch menu.
7. Scroll to select a switch to activate the gyro rate mix. Press the jog dial to conrm your selection.
a. If you choose the “NULL” option, the set gyro rate will remain active at all times for this model.

HITEC Flash 7 Specifications

General

Brand	HITEC
Model	Flash 7
Category	Remote Control
Language	English