HMS Anybus Communicator - Functions

Server Side Include (SSI) 36
Doc: HMSI-27-309, Rev. 3.11Anybus Communicator PROFINET User Manual
7.2 Functions
DisplayMacID
This function returns the MAC ID in format xx:xx:xx:xx:xx:xx.
Syntax:
<?--#exec cmd_argument="DisplayMacId"-->
DisplaySerial
This function returns the serial number of the network interface.
Syntax:
<?--#exec cmd_argument="DisplaySerial"-->
DisplayFWVersion
This function returns the main firmware revision of the network interface.
Syntax:
<?--#exec cmd_argument="DisplayFWVersion"-->
DisplayBLVersion
This function returns the bootloader firmware revision of the network interface.
Syntax:
<?--#exec cmd_argument="DisplayBLVersion"-->
DisplayIP
This function returns the currently used IP address.
Syntax:
<?--#exec cmd_argument="DisplayIP"-->
DisplaySubnet
This function returns the currently used Subnet mask.
Syntax:
<?--#exec cmd_argument="DisplaySubnet"-->
DisplayGateway
This function returns the currently used Gateway address.
Syntax:
<?--#exec cmd_argument="DisplayGateway"-->