14 User Manual Compact Crane C10
GENERAL INSTRUCTIONS
FOR USE
The compact crane is a machine intended for lifting loads. It is only permitted to use the compact crane for the
intended uses. Additionally, you are not permitted to change movement speeds on your own. Also it is absolutely
prohibited to exceed the maximum working load (see section 9.1), and it is forbidden to bypass sensors. If
changes are desired, you must contact the manufacturer.
Before the machine is put in use the user must be sufficiently familiar with this user manual. All the instructions
and safety warnings in this user manual must be followed. Any use other than the permitted use may result in
danger to users and bystanders. Moreover, the machine may also be damaged. It is not permitted to use the
machine in a way other than prescribed without express written permission from Hoeflon International B.V.
Every employee must be familiar with all the instructions in this user manual. Failure to heed this requirement is
considered to be negligence.
To Next Page
Loading...