TRANSPORT, STORAGE, DISPOSAL
U.C10.00.00.EN Version 2.0 79
Lift the Compact Crane using 2 lashing straps or chains with a capacity of at least
2500 kg per strap/chain. Attach these to the lifting point on the boom (see figure
104).
Figure: 104
8.1.1 Securing
WARNING!
Overloaded eyes can cause damage to the machine. Therefore
always heed the following instructions.
WARNING!
Folding a lashing strap double also doubles the applied tension.
Point Load on attachment point
Lashing points on undercarriage Max. 2500 kg per eye
Towards the front and sides, lash down at least 0.5x the machine's weight; towards the rear lash down at
least 1x the machine's weight.
It is recommended that the space between the headboard of the transport vehicle and the front of both
tracks be filled, in connection with braking forces. Otherwise, use lashing provisions that can hold at least
1.5x the machine's weight at the rear.
If the lashing eyes on the undercarriage are used to secure the crane, the superstructure must be secured to
prevent rotation in both directions. Otherwise the turntable may be damaged by movement that occurs
during transport.
Make sure the tracks of the compact crane are resting directly on the deck of the transport vehicle, because
ground protection plates or anything similar in between will reduce the sliding resistance of the crane
relative to the transport vehicle.
To Next Page
Loading...