WORKING WITH THE COMPACT CRANE
U.C10.00.00.EN Version 2.0 23
WORKING WITH THE
COMPACT CRANE
Every employee must observe the following rules/warnings while working with the compact crane.
DANGER!
Never enter the working area; this can have serious
consequences.
DANGER!
Do not let unauthorised persons enter the working area of the
compact crane.
DANGER!
It is prohibited to use the compact crane in an explosive
environment!
DANGER!
The user is responsible for safe operation of the crane, the
selection of appropriate accessories (based on intended use,
capacity, validity of inspection stickers and visual inspection) and
the personal safety of the operator and people in the vicinity.
DANGER!
Outriggers may only be used on a suitable surface. This means
adequately level and with sufficient load bearing capacity.
WARNING!
Work safely at all times, taking into account the crane,
surroundings, ground and load. Do not begin working if there is a
plausible risk of a dangerous situation developing before
appropriate measures have been taken.
WARNING!
Operate the compact crane carefully; to prevent jolts while
driving, never release the levers suddenly. May only be operated
by authorised persons!
WARNING!
When bypasses are placed in the electrical cabinet (figure 26 no.
6) sensors are bypassed. It is prohibited to bypass the winch
sensor. If you place a bypass, you do so entirely at your own risk.
To Next Page
Loading...