HOEFLON C10 - Lubricant Specifications; Boom Extension and Retraction Chains

62 User Manual Compact Crane C10
7.5 Lubricant specifications
The diesel fuel used in the Yanmar engine must meet the following specifications.
 The cetane number must be 45 or higher.
 Use clean fuel.
 The diesel may not be more than 7% bio diesel.
Diesel fuel specifications
Location
ASTM D975
No. 1D S15
No. 2D S15
USA
EN
590:96
European Union
ISO 8217 DMX
International
BS 2869
-
A1 or A2
United Kingdom
JIS K2204 Grade No.2
Japan
KSM
-
2610
Korea
GB252
China
7.5.1 Boom extension and retraction chains
 Do not repair chains or insert links; if deficient, completely replace.
 If there are two extension or retraction chains, replace both, along with the connections, at the same time.
 If the chains are soiled to the point that lubrication no longer helps, clean with petroleum ether or diesel. Do
not clean with acidic agents or a high pressure hose. These can damage the chains.
 Check the chain regularly for lubrication, rust, breaks in the pins/plates and wear and tear.
 Lubricate the chain every 100 hours (see maintenance schedule).
Manu-
facturer: Engine oil Coolant Hydraulic oil Final drives
Lubri
-
cation
points Chains Sliding sections
Yanmar (diesel) Universal Bio
Lubri
-
cating
grease Spray
Q8
Q8 Formula
Advanced SAE
10W-40
Q8 Antifreeze Long
Life G12 Heller 32
Q8 Holbein
HP SE Bio
46 T 55 EP 2
Industrial
chain spray EP2 PTFE
Total
Total Quartz 7000
Diesel SAE 10W-40 Auto Supra
Equavis AF
32 / ZS 46
BioHydran
TMP 32
EP-B
80W90 EP 2
Industrial
chain spray EP2 PTFE
Shell
Shell Helix Plus
10W-40 G12
Shell Tellus
S2/S3
Shell
Naturelle
HF-E 32
Spirax S3
AX 80W-90 EP 2
Industrial
chain spray EP2 PTFE
Kroon oil Emperol 10W-40 Coolant SP 12 Perlus ZF 46
Perlus
Biosynth 46
Gearlube
GL-5 80W-
90 EP 2
Industrial
chain spray EP2 PTFE