MAINTENANCE/ TROUBLESHOOTING
U.C10.00.00.EN Version 2.0 61
Lubrication chart
Lubricate the compact crane as shown in the lubrication chart below, paying particular attention to the following:
• Clean the grease nipples thoroughly before lubrication.
• Remove excess/old grease from the masts.
• Use clean greases, stored in sealed packaging.
• Lubricate the top side of the plastic guide on the boom by inserting a grease gun fitted with a spot nozzle through
the holes, when the boom is fully extended.
• Use only prescribed greases; see lubricant specifications.
To Next Page
Loading...