HOEFLON C10 - Guiding the Load

34 User Manual Compact Crane C10
6.3.3 Guiding the load
WARNING!
The mass, centre of gravity and permissible lift points of the load must
be known. The proper crane configuration and lifting accessories can be
determined accordingly.
WARNING!
Always operate the machine with great care and only in the first
operating speed. Avoid abrupt movements and maintain contact with
any assistants helping to guide the load.
Adhere to the following rules when guiding a load:
 Never place body parts (feet, legs, hands) under the load.
 During horizontal guiding of the load, follow behind the load.
 Never place body parts between the load and obstacles in the surrounding area, and never go between the
load and an obstacle without a safe amount of space between them.
 When working near or with fragile material (e.g. stone, glass) where there is a risk of splinters/shards, wear
protective clothing and safety glasses.
 Maintain visual contact and open channels of communication between guides and operator.
 When working with tall, unstable loads, never stand in the fall direction of the load.
 Whenever possible, use guide lines to maintain a safe distance.
 When using guide lines for a load at height, never walk under the load and maintain a safe distance, taking
into account influence of the fall direction of the load due to obstacles in the environment.
 Make sure you always have an open escape route where you can flee for safety.
 Never stand or hang on the load.
 Make sure the load is properly secured and is and will continue to hang stable.
 Avoid abrupt movements of the machine and load.
 Only operate the machine in the slow operating speed.
 When using guide lines, clear the surrounding areas to eliminate the risk of tripping and the risk that the
guide line will get caught and/or damaged.