HOEFLON C10 - Positions of Winch Head in 30˚ Section When Used with Jib

WORKING WITH THE COMPACT CRANE
U.C10.00.00.EN Version 2.0 51
6.7.5 Positions of winch head in 30˚ section when used with jib
Jib
Winch head in top hole.
See the adjacent figure for the cable routing.
Cable under auxiliary pulley of the 30° section
and over auxiliary pulley at rear of winch head,
to large cable sheave in winch head.
Winch head in 2
nd
hole.
See the adjacent figure for the cable routing.
Cable under auxiliary pulley of the 30° section
through to large cable sheave in winch head.
Winch head in 3
rd
hole.
See the adjacent figure for the cable routing.
Cable under auxiliary pulley of the 30° section
through to large cable sheave in winch head.
Winch head in bottom hole.
See the adjacent figure for the cable routing.
Cable under auxiliary pulley of the 30° section
through to large cable sheave in winch head.