EasyManua.ls Logo

Honda BF135A - Page 99

Honda BF135A
692 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-10
8) Clamp the fuel tube B and D with the commercially
available tube clips as shown, and disconnect the fuel tube
B and D from the fuel pump (low pressure side).
9) Disconnect the oil tube from the mounting case.
• Before disconnecting the fuel tubes, be sure to clamp the
fuel tubes with a tube clips to prevent the gasoline from
leaking.
10) Move the water relief tube A from your side of the
projection on the cylinder head cover to the other side.
[2] MOUNTING
CASE
[1] OIL TUBE
[1] WATER RELIEF
TUBE A
[3]
CYLINDER HEAD
COVER
[2]
PROJECTION
[1] TUBE CLIP
(Commercially
available)
[2] FUEL TUBE B
[4] FUEL TUBE D
[3] FUEL PUMP
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling
fuel.
• Keep heat, sparks and flame away.
•Handle fuel only outdoors.
• Wipe up spills immediately.
WARNING

Table of Contents