Honda BF135A - Maintenance; Maintenance Schedule

3-1
1. MAINTENANCE SCHEDULE
2. ENGINE OIL
3. OIL FILTER
4. GEAR CASE OIL
5. SPARK PLUGS
6. VALVE CLEARANCE
7. FUEL STRAINER (LOW PRESSURE
SIDE)
8. FUEL STRAINER (HIGH PRESSURE
SIDE)
9. WATER SEPARATOR with WATER
LEVEL SENSOR
10. IDLING
11. SHIFT CONTROL CABLE
12. THROTTLE CONTROL CABLE/
THROTTLE LINK
13. REMOTE CONTROL LEVER FRICTION
14. ALTERNATOR BELT
3. MAINTENANCE
1. MAINTENANCE SCHEDULE
Engine oil Check level ○
3-2
Change ○○
Gear case oil Change ○○ 3-4
Engine oil filter Replace ○ 3-3
Alternator belt Check-adjust ○ 3-28
Throttle linkage Check-adjust ○○ 3-26
Idling speed Check-adjust ○○ 3-22
Valve clearance Check-adjust ○ 3-9
Spark plug Check ○○
3-8
Clean ○○
Replace ○ 3-7
Propeller and
Check ○ 14-2
cotter pin
Anode metal Check ○ 14-88
Lubrication Grease ○ (2) ○ (2) 2-77
Water separator Check ○ 3-19
Fuel strainer Check ○
3-15
Replace ○
Fuel strainer
Replace ○ 3-18
(High pressure type)
Thermostat Check ○ 8-3
Fuel line Check ○
5-104
Replace Every 2year (Replace if necessary)
Battery and cable
Check level-tightness ○ –
connection
Bolt and nuts Check-tightness ○○ –
Crankcase breather
Check ○ –
tube
Cooling water
Clean ○ (3) –
passages
Each
use
After
use
First
month
or
20 Hrs.
Every
6 month
or
100 Hrs.
Every
year
or
200 Hrs.
Every
2 year
or
400 Hrs.
Refer
to
page
REGULAR SERVICE PERIOD (1)
Item Perform at every indicated month or
operating hour interval, whichever
comes first.
(1) For professional commercial use, log hours of operation to determine proper maintenance intervals.
(2) Lubricate more frequently when used in salt water.
(3) When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.