Honda BF135A - Spark Plugs

3-6
4) Remove the two 6 x 25 mm socket bolts and remove the
PHC cover.
5. SPARK PLUGS
Removal:
1) Remove the engine cover (P. 4-2).
2) Set a screwdriver in the slot in the two mud guard clips at
the top of the under cover grommet, and raise the mud
guard clips.
Remove the two mud guard clips.
3) Detach the upper part of the under cover grommet.
[2] 6 x 25 mm SOCKET
BOLT (2)
[1]
PHC COVER
[5]
UNDER COVER
GROMMET
[4]
MUD GUARD
CLIP (2)
[3]
MUD GUARD
CLIP
[1]
SCREWDRIVER
[2] SLOT