iii
• Do not drop the unit or subject it to physical shock.
• Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments,
where the operating temperature is outside the recommended range of 14°F to 131° F (-
10°C to 55°C). HN300802xxE/HN301602xxE: 14°F to 113°F (-10°C to 45°C).
• Avoid operating the unit close to sources of powerful electromagnetic radiation, such as
radio or TV transmitters.
• Ensure to connect the power cord to a socket-outlet with earthing connection, or
equivalent.
• The product is only to be connected to PoE network without routing to outside plant.
Safety Instructions
Before installing or operating the unit, read and follow all instructions. After installation,
retain the safety and operating instructions for future reference.
1.
HEED WARNINGS - Adhere to all warnings on the unit and in the operating instructions.
2.
INSTALLATION
• Install in accordance with the manufacturer’s instructions.
• Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
• Any wall or ceiling mounting of the product should follow the manufacturer’s
instructions and use a mounting kit approved or recommended by the manufacturer.
3.
POWER SOURCES - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supplied to your
facility, consult your product dealer or local power company.
4.
MOUNTING SYSTEM - Use only with a mounting system recommended by the
manufacturer or sold with the product.
5.
ATTACHMENTS/ACCESSORIES - Do not use attachments/accessories not
recommended by the product manufacturer as they may result in the risk of fire, electric
shock, or injury to persons.
6.
CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7.
SERVICING - Do not attempt to service this unit yourself. Refer all servicing to qualified
service personnel.
8.
REPLACEMENT PARTS - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock or other hazards. Using replacement parts or accessories other than the original
manufacturers may invalidate the warranty.
To Next Page
Loading...
Need help?
General
