Parts List
4/00 DR4300 Circular Chart Recorder Product Manual 191
9. Parts List
9.1 Overview
Introduction
This section provides the replacement parts lists for the DR4300 Circular Chart Recorder.
Most parts are supplied on an optimum replacement unit basis; that is, part numbers are given for complete
printed circuit assemblies rather than for individual PCA components.
The figures that follow are exploded views of the DR4300 recorder. Each part is labeled with a key number
and the key numbers are listed in tables with associated part numbers.
When ordering parts, be sure to specify your recorder’s serial and model numbers (on chartplate) as well as
the part number.
Also included for your reference are an Internal Cabling drawing (Figure 9-4) and an Internal Wiring
Diagram (Figure 9-5) for options only.
What’s in this section?
The following is a list of the topics covered in this section.
Topic See Page
9.1 Overview 191
9.2 Exploded Views
Figure 9-1 Door Assembly
Figure 9-2 Chart Plate
Figure 9-3 Recorder Components
9.2 Internal Cabling
Figure 9-4 Internal Cabling CE Mark Version
Figure 9-5 Internal Cabling Non-CE Mark Version
192
192
193
194
196
197
To Next Page
Loading...
Need help?
General
