Document 800-09312V2 Rev A 17
08/2012
Installation and Setup
This chapter describes how to:
•Mount the camera
• Adjust the camera for the clearest image
• Set up the camera in a network system
Before You Begin
Before installing your camera, Honeywell recommends that you:
• Carefully read this guide and keep it for future reference.
•Check www.honeywellvideo.com/products/cameras/index.html to find your camera,
then download the latest manuals for your camera.
• Download the latest software updates for your camera. Go to Honeywell download
center, www.honeywellsystems.com/support/download-center/index.html, and
follow the instructions on the page to logon, find your camera, and then download
the latest software updates.
Unpack Everything
Check that the items received match those listed on the order form and packing slip. The
camera packing box should include, in addition to a Quick Install Guide:
• One fully-assembled Performance Series Indoor Day/Night H.264 IP dome camera,
including factory-installed BNC connector for local video out aim and focus
• One camera hardware kit that includes mounting screws and screw caps
• One BNC cable for local video out – aim and focus
• One mounting template
• One product warranty
• One DVD containing the software and this User Guide
If any parts are missing or damaged, contact the dealer from which you purchased your
camera or call Honeywell Customer Service (see Warranty and Service on page 13).
To Next Page
Loading...
Need help?
General