Honeywell HD45IP - Step 3: Log Onto the IP Utility and Discover Network Devices; Figure 3-1 Honeywell IP Utility Log on Window

34
Installing the Honeywell IP Utility and Web Client
2. Click the check box beside Microsoft .NET Framework 3.5 to enable it.
3. Click OK to save the new setting.
Disable User Account Control (UAC) Settings
1. Go to Getting Started  Change UAC Setting.
2. Change the UAC setting to Never Notify.
3. Click OK to save the new setting.
Step 3: Log Onto the IP Utility and Discover Network Devices
1. Double-click the Honeywell IP Utility icon on your desktop.
- or -
Click Start  Programs  Honeywell Video Systems  EQUIP Series  IP Utility
 Honeywell IP Utility.
The Honeywell IP Utility Log On window opens.
Figure 3-1 Honeywell IP Utility Log On Window
2. Select Administrator or Guest from the User Name drop-down list.
3. Enter the case-sensitive password in the Password field.
• The default Administrator password is 1234.
• The default Guest password is guest.
Note During the installation set up, you must log on as an Administrator to access
all the features.