Document 800-09312V2 Rev A 45
08/2012
IP Camera Web Client
Before you launch the Honeywell IP web client, ensure that you complete the following
sections before configuring your camera:
• Chapter 2, Installation and Setup
• Chapter 3, Installing the Honeywell IP Utility and Web Client
This chapter covers:
• Navigating the web-client interface
• Understanding the web-client features and functions
• Configuring compression settings
• Configuring camera settings
• Setting tamper detection
• Configuring video detection settings
Overview
The network camera web client is a web-based application that enables you to view video,
and configure camera settings, sabotage detection settings, and motion detection
settings for the network camera.
Certain features of the IP camera web client are user-based and are available only to the
Administrator. The guest user is limited to the Live View tab.
To Next Page
Loading...
Need help?
General